UTH Motors | UTH-434-A-92-A-x-000


Model NumberUTH-434-A-92-A-x-000
R (ohm)1.3
L (mh)6.5
Ke (v/krpm)470
Kt (oz-in/a)634.5
Kt sine (oz-in/a)549.5
Km (oz-in/w/1/2)556.5
Ther Res (degC/watt)0.5
Torque (oz-in)7466
Current (amp)11.8
Poles24
Weight (ounce)n/a
Inertia w/o BI (Ib-in-sec2)n/a
Thermal Res (housed degC/w)0.4
Torque Housed (housed oz-in)8347
Current(housed amp)13.2
Notesexternal halls
Stator ID (Inch)14.86
Rotor ID (Inch)13
End Turn Lead End (Inch)0.9
Stack Height (Inch)1.8
Rotor Length (Inch)2
Winding OD (Inch)17.1
Stator OD (Inch)17.1
Rotor OD (Inch)14.36
Information for reference only.
Contact factory for mechanical drawing.


Torque speed performance estimate
Move slider to select your voltage. Current voltage:Volts
(Note: Graph will take a minute to update)

12v300v


Graph is intended as an estimation of performance only. Please contact factory for complete simulation.

Notes
1. Applimotion not responsible for typos in data, always check with factory for actual motor drawings before designing.
2. ULT Series ring magnets are limited to 5000 rpm, contact factory for higher speed magnet material.
3. Mechanical speed limits are imposed on all motors, contact factory for special options for higher speeds.
4. Kt value is calculated from the Ke value and is a static value. Amplifier design will impact actual running torque, contact factory.
5. Peak torque output is based on a 3:1 peak to continuous current ratio in the amplifier, and is limited to 10% duty cycle.

Applimotion Inc, 5915 Jetton Lane, Loomis CA 95650 | P 916-652-3118 | F 916-652-3171