Medical Devices

Portable Medical Devices

Many portable medical devices require battery operated high efficiency motors with very low impedance. Motor design options that minimize resistance and inductance result in high efficiency. Applimotion ULT-H series high performance direct drive motors can be selected with special low impedance windings, perfect for portable medical devices.

Pumping Systems

Whether it is a device to induce hypothermia, a cardiac assist device, a total artificial heart, or any patient based fluid control system, you can count on Applimotion to optimize motors or turn unique mechanical systems into motor assemblies. The integrated design always wins with reduced part count, increased reliability, lower weight and lower cost. It also enables customers to differentiate in the marketplace. Most engineers can buy off the shelf parts and connect them together. The engineers that design an integrated solution really enable a more competitive solution for their company.

Surgical Tools

Applimotion offers custom high grade frameless and framed motors for use in tools and hand held devices. These motors can be approved for Autoclave or ETO applications. Applimotion routinely optimizes the motor design and manufacturing techniques as well as electrical characteristics in order to match performance to complex mechanical systems. And, of course, special wiring, connectors and temperature sensors are available for a turn-key plug in solution.

Top of Page
Diagnostic Machines

Imaging sometimes requires motors with large through holes and sizes up to two meters in diameter. Applimotion LARC series motors make the transition from traditional geared motor transmission to direct drive large diameter seamless. The other thing that is seamless, is the integration of this motor type into customer mechanical and bearing systems.

Scanning Systems

On a small scale, imaging can be critical to non-invasive measurements. Applimotion Axial Airgap motors offer unique attributes allowing low profile mechanics and a level of mechanical integration not possible with other motors. These motors are the first alternative to a customized

solution without any expensive tooling required, compared to traditional motors that required laminated stator structure. Contact the factory for special motion system requirements

Linear Motor Pick and Place Platforms

Not all linear motors are equal. Applimotion linear motors were designed with high frequency response in mind. Routinely optimized to customer platform mechanical systems, Applimotion has no problem adjusting the mounting system or mechanical attributes. Step and settle applications benefit for high frequency response and high inherit natural frequencies. Contact the factory for custom Linear motor solutions

Turret Rotation

ULT-H high output direct drive frameless motors cover sizes from 15 mm to 535 mm diameter. All motors have large through holes and low profile. Whether it is a gimbal system or just a single axis of turret rotation, the ULT motors perform and deliver. Coupled to high resolution encoder systems and precision bearings, the performance and accuracy cannot be touched by traditional geared mechanical systems. Less parts, lower profile, and smoother operation are just the beginning of what can be done.

Top of Page